Pre-Made SS316L Clapton Coils 0.5 Ω – 10 Pack

£3.99

Category

Out of stock

Description

SS316L Clapton Coils 0.5 Ω

The pre-made SS316L Clapton coils 0.5 Ω are crafted from corrosion-resistant stainless steel 316L and feature a Clapton design, where a thin wire wraps around a thicker core. As a result of this construction, the surface area increases, which ensures efficient heat distribution and consistent performance. Ten coils are packaged in a pack with each coil exhibiting an exact resistance of 0.5. This means the coils can be used for a wide variety of heating elements, be they small appliances or DIY projects. Whenever they need to be replaced or installed, they can be easily replaced or installed due to their standard dimensions. It is the SS316L Clapton coils that provide a reliable and convenient solution for diverse heating applications.

About The Product

The details of this product are as follows:

  • Metal – SS316L
  • Pack Size – 10 Coils
  • Resistance – 0.5 Ω
  • Coil Build – Clapton

Why Use The Crazy Wire Company

  1. Quality of products: The Crazy Wire Company always  offer high-quality products that meet industry standards and customer expectations.
  2. Selection: We offer a wide variety of wire products and sizes to meet the diverse needs of our customers. We have more than 600 products available through our site and counting. 
  3. Price: We always offer the best value possible. Our wires are available as part of our major weaving processes, so it is bought at the best possible rate. 
  4. Availability: Our products are kept in house and are ready to ship immediately. 
  5. Customer service: Our experienced staff help our customers feel confident in their purchases and provide assistance when required. 

What Else Is Available?

We do not only offer SS316L wire. We also have a huge range of KA1 and nichrome wire in immediate stock too.

Ribbon wire and flat wire are stocked for immediate dispatch too.

 


FAQs About This Product

How Do I Install SS316L Clapton Coils 0.5 Ω?

  1. Safety First: Before you begin, ensure that the power source to your device is turned off or disconnected to prevent any accidental injuries or damage.
  2. Access the Coil Compartment: Open or disassemble the part of the device where the coil is to be installed, following the manufacturer’s instructions.
  3. Remove Old Coil: If you are replacing an old coil, carefully remove it from its slot or connection points.
  4. Inspect and Prep: Inspect the SS316L Clapton Coil 0.5 Ω to ensure it’s free from any visible defects. Depending on your device, you may need to pre-shape or adjust the leads of the coil to fit.
  5. Place the Coil: Positioning the SS316L Clapton Coil 0.5 Ω in the designated area will ensure that it’s properly aligned and seated. Secure the coil leads into the connection points, terminals, or posts, and tighten any screws or clamps as necessary.
  6. Check the Resistance: If applicable, check the resistance of the installed coil using a multimeter or the device’s built-in ohm reader to ensure it reads approximately 0.5 Ω.
  7. Test: Briefly power on the device to ensure the coil heats up evenly and without any issues. Observe for any hotspots or irregularities.
  8. Reassemble: Once satisfied, reassemble any parts of the device that were opened or removed during installation.
  9. Safety Check: Before using the device continuously, ensure all components are securely in place and that there are no loose connections.
  10. Usage: Proceed to use your device as per the manufacturer’s guidelines.

How Do I Properly Dispose Of SS316L Clapton Coils 0.5 Ω?

  1. Remove Safely: Ensure that the power source is turned off and the coil is cool before attempting to remove it from your device. Follow proper procedures to safely detach the coil.
  2. Clean: It’s a good practice to clean the coil by gently wiping off any residue or dust although this isn’t strictly necessary for disposal.
  3. Check Local Regulations: Different regions have specific guidelines regarding the disposal of electronic components and metals. Check with your local waste management authorities or recycling centers to understand the proper procedure for disposing of used coils.
  4. Recycle: Stainless steel is recyclable, and many recycling centers accept metal scraps, including used coils. If your local recycling center accepts stainless steel, you may place the SS316L Clapton Coils in the designated bin for metal recycling.
  5. General Waste: If recycling is not an option in your area, you can dispose of the coils in the general waste bin. However, it’s important to avoid disposing of them as hazardous waste.
  6. Avoid Littering: Do not dispose of the coils in open environments or public places as they can pose environmental hazards.
  7. Store Safely: If you are unable to dispose of the coils immediately, store them in a safe and dry place, away from children and pets, until you can dispose of them properly.
  8. Document Disposal: If you’re a business or an organisation, it might be necessary to document the disposal of electronic components for compliance and record-keeping purposes.

 


Check out our blog expanding on the difference between Clapton and Flapton coil wires. This is an extremely detailed article, which we hope will provide much insight into the subject. 

We also offer similar products through our highly popular eBay store, check us out there too.

Contact our team today if you have any questions at all. We are always really keen to help in any way that we can. 

Reviews

There are no reviews yet.

Be the first to review “Pre-Made SS316L Clapton Coils 0.5 Ω – 10 Pack”

Your email address will not be published. Required fields are marked *